Ka-Bar®, USN Dive Knife, and USAF pilots Knife

ASEK™ SURVIVAL KNIFE SYSTEM NSN: 1095-01-518-6832. The Aircrew Survival Egress Knife (A.S.E.K.) designed and manufactured by The Ontario Knife Company is the one and only Survival/Egress knife chosen by the Untied States Army to be included in its Air Warrior Equipment System. Don’t be fooled by imitations! This is the only ASEK™ Survival Knife Systems tested and approved by PM Soldier and Natick Research Labs to meet the criteria defined by the US Army. This system is a Survival/Egress Knife with Plexiglas Breaker, Hammer, Saw teeth, serrations, spear holes, lanyard hole and insulated guard. It comes with an anodized aluminum strap cutter to cut webbings, cord, cloth, etc. It has a screwdriver and a honing rod to keep your knife field sharp. The fire retardant scabbard fits on the pilot’s vests, load bearing equipment, web belt, belt or can be worn on the calf as designed for Air Warrior. The strap cutter fits in the left leg pocket on flight suits and is a must for medical crews. 1095 carbon steel blade .1875" thick; 5" blade; 10 1/4" overall length Hardness Rc 50-54 Zinc phosphate finish to inhibit rust. Complete ASEK™ consists of the following: ASEK™ Knife NSN: 1095-01-518-6868, ASEK™ Sheath NSN: 1095-01-518-6875, and ASEK™ Strap Cutter / Multi Tool NSN: 1095-01-518-6877. NEW.
KF1400 . . . . . $109.95 Complete Three Piece System.

ASEK™ Strap Cutter / Multi Tool.   Anodized aluminum strap cutter to cut webbings, cord, cloth, etc. with screwdriver and a honing rod. NSN: 1095-01-518-6877. NEW.
KF1403 . . . . . $24.95 ea.

U.S.M.C. KA-BAR® COMBAT FIGHTING KNIFE. Made in Ka-Bar's Olean, New York factory to original 1942 ordinance drawings as issued by the war department. Features: black epoxy coated carbon steel hand-honed blade, handle made of highly polished leather disks, genuine cowhide sheath, and a booklet detailing the history of this remarkable knife. Measures 11 7/8" overall with 7" blade. NEW.
KF6969 . . . . . $48.95ea.

GERBER LMF II KNIFE. Gerber collaborated with the military for two years developing this knife as the ultimate survival tool. The rugged, partially serrated 420 High Carbon steel blade could be used to construct a shelter, cut wood for a fire, or slice through thin metal and Plexiglas. The over-molded handle is made for long-use comfort without blistering. Butt cap and tang are separated by the handle's substrate to absorb shock when used as a hammer and provide electrical insulation from the blade. The ergonomic design also has lashing holes to use the knife as a spear head. The versatile sheath can be worn on the calf, belt or a Molle vest, and it has an integrated sharpener.
Blade length: 4-7/8''.
Overall length: 10-1/2".
Colors: Coyote

NEW.
KF01400 . . . . . $89.95 ea.

U.S. MARINE CORPS MULTI-PURPOSE BAYONET. The OCK3S Marine bayonet is designed for the modern Marine. Features are as follows: Clip point full tang blade, 13.25" overall length, 8" blade, 1 3/8" wide, 1 3/4" Mission Serration, .200" Thick Proprietary Carbon Steel, 53-58 RC Hardness, Phosphate non-reflective finish. Ergonomically designed grooved Dynaflex® handle with positioning access point for quick redirect positioning of blade in reduced visibility situations. Scabbard is manufactured with a low noise signature polymer elastomer and is fitted with an internal stainless steel spring friction device to secure bayonet. Scabbard also features an attached ceramic coated aluminum honing rod on the back. Bayonet is is double secured to scabbard which also features two load bearing attaching straps with cross straps which allows for variation of placement on load bearing equipment and/or belts. Bayonet will fit the M-16 family of rifles. Brown grip, scabbard, and webbing ensures compatibility with the new MARPAT digital camouflage. Handle is embossed with the Eagle, Globe and Anchor emblem on one side and USMC on the other. Blade is stamped "Combat U.S.M.C.". Manufactured by Ontario Knife Company. NEW.
OKC3S . . . . . $119.95 each.

KA-BAR® COMMEMORATIVE IRAQI FREEDOM FIGHTING KNIFE. Genuine Ka-Bar USMC combat knife with commemorative Iraqi Freedom design on the blade.  Made in Ka-Bar's Olean, New York factory to original 1942 ordinance drawings as issued by the war department. Features: black epoxy coated carbon steel hand-honed blade, handle made of highly polished leather disks, genuine cowhide sheath, and a booklet detailing the history of this remarkable knife. Measures 11 7/8" overall with 7" blade. NEW.
KF3217 . . . . . $54.95ea.

U.S. NAVY MK III COMBAT KNIFE. Manufactured by Camillus. The MK III features: solid steel butt cap, large non-slip resin grip, serrated back, sharpened double-edge point., ambidextrous sheath with drain hole, wire pistol belt hangers/belt loop, and leg tie. Measures 10.75" overall with 6" blade. NEW.
KF6979 . . . . . $49.95ea.

USAF PILOTS SURVIVAL KNIFE. Genuine issue to both U.S army and USAF pilots. Features: saw-back edge, hexagonal butt cap, leather washer handle, , high carbon parkarized steel blade. Leather sheath features carbourndum stone and securing lace. Measures 9.5" overall with 5" blade. NEW.
KF3278 . . . . . $34.95ea.

ONTARIO KNIVES MARINE USMC KNIFE. U.S. Military Issue, manufactured in accordance with U.S. government specifications. Marine USMC features: 7" 1095 carbon steel clip point blade .165" thick, with blood groove and zinc phosphate finish, weather-proofed black leather handle with steel cross guard and butt cap, and black leather sheath. Bulk government packaging, no box. 12" overall. NEW.
KFON498 . . . . . $29.95ea.